Everything you need to easily build a drip irrigation system for potted plants. Only a pair of scissors is needed.
The adjustable drippers mean that every plant receives the right amount of water.
- Screw the pressure regulator on to the tap and then to the starter adapter, connect the micro tube to the adapter and lay it along the ground to the pots. Cut the micro tube near the pots and insert the line dripper.
- At the dripper outlet, insert the micro tube and do the same to connect subsequent pots. In the last dripper on the line, insert 3 cm of micro tube and close with the plug. You have two microvalves available to isolate part of the system. Regulate the drippers to achieve the desired flow for each pot.
- 1 pressure regulator 3/4
- 1 micro tube adapter 3/4"
- 20 drippers
- 2 microvalves
- 25 m micro tube 6 x 4 mm ø
- Plugs for micro tube
- Tee for micro tube